Ariston Boiler Fault Finding Tips

Added On: 19/06/2008

2 Ratings

Ariston Boiler Fault Finding Tips

Our gas boiler fault finding and repair tips could help get your boiler fixed quicker

A faulty boiler can be a real pain, if you ave an old or poorly maintained Ariston boiler then faults can appear. There is no need to panic though.

If you find your Ariston gas combi or condensing boiler isn't working then there are a number of things you can check before you call out an engineer. Take a look at our basic gas boiler tips and advice:

• Check the pilot light - Is it on? The boiler pilot light can usually be seen through a small window on the front of the boiler.
• Check that the heating and hot water boiler timer are turned on.
• Are there any lights on the boiler that shouldn't be there, or should but are turned off? Check the correct switch configuration in your manual and make sure all is as it should be.
• Make sure there is power to the boiler, and that the fuse in the plug hasn't blown.
• Check that the gas is turned on. The gas supply woundn't usually turn itself off so it may be a connection issue. If in doubt, contact your gas company to check.
• Take a look at the pressure in the boiler. Many boilers should sit at around 2 bar, but it can vary between models so check your manual. To sort the pressure, turn the valve tap (that is usually on the same pipe as the pressure guage) a quarter of a revolution, until you see the needle rise. Once it is at the correct pressure close the tap again.
• Check the boiler thermostat to make sure it's not just turned off.
• If a gas boiler isn't regularly maintained then it can develop faults, make sure you get regular servicing to increase the boiler's life and to ensure it is safe and isn't leaking carbon monoxide (which can result in death).

Article comments

Leave a comment

Name (required)

Mail (will not be published) (required)

Website

Type the characters you see in the picture below.

Reload image

Comment on this article (required)